Product Knowledge
If you have any questions, do not use this product and contact us for clarification.
Always ensure proper maintenance to keep your suppressor functioning efficiently.
You can use a sonic cleaner, however, do not let the parts touch the sonic cleaner tank or each other. Suspend each part separately in the tank.
Do Not use a cleaning patch in your barrel. Use a bore snake. Specialty bore snakes are available at this link but are not required: https://shop.innovativearms.com/product/integral-boresnake/
Cleaning and Maintenance Instructions for the Integral IASC9 and IASC9-K Suppressor
- Cleaning Frequency
- The Integral suppressor requires minimal maintenance.
- Clean at least every 500 rounds and/or when you can shake the firearm and hear unburnt powder, lead, or debris moving inside (similar to a sand-like sound).
- Cleaning the Core
- The core is made of 17-4 PH stainless steel.
- You may use any gun cleaner of your choice on the core.
- Cleaning the Cups
- The cups are made of Type 3 hardcoat anodized 6061 aluminum.
- Only use a non-ammonia-based cleaner to avoid damage.
- Reassembly After Cleaning
- Apply a light coat of dielectric grease where the cups contact each other, as well as on the core and barrel threads.
- Use the provided tool to tighten the suppressor against the barrel shoulder.
- No torque specifications are required—when the suppressor shoulders against the barrel, proper bore alignment and cup sealing will be achieved.
- Please go to the IASC9-K FAQ tab to see your beyond the warranty information about our free maintenance service.
Innovative Arms Silencers
Average rating: 0 reviews