If you have any questions, do not use this product, and contact us for clarification.
Model: IA-BER
*We recommend that you remove the core from the silencer tube for a short time once you are done shooting. This will keep the tube and core from seizing together during the expansion/contraction from the suppressor cooling off from use. Make sure that your firearm is unloaded and pointed in a safe direction. Use a heat resistant glove if needed.
*After shooting, be sure to clean your suppressor and apply a light coat of oil.
CLEANING
Proper cleaning of your integral silencer is imperative for a long lifespan and to maintain the ability to disassemble. Cleaning must be performed after every shooting session, not to exceed 300 rounds per shooting session before cleaning. Clean the firearm as recommended by the manufacturer, however, use a bore snake, not a cleaning patch when cleaning the barrel and chamber of the firearm. Specialty bore snakes for integrals, and permanently pinned suppressors are available on our webstore. Specialty Bore Snake
*Before cleaning be certain the firearm is unloaded, and the bolt is open and locked back. Keep the firearm pointed in a safe direction at all times.
#1. Remove the tube body.
A tool is provided to remove the front end cap. However, If you misplace the tool you can use a 1/2″ drive wrench temporarily. Grasp firearm firmly and insert the provided takedown tool in the front of the silencer core (muzzle end). Unscrew the front end cap from the tube by turning the tool counterclockwise until the cap is free of the tube body. Using a left and right twisting motion work the tube off of the barrel/silencer core and remove the tube completely off.
#2. Clean the inside of the tube body.
Clean the inside of the tube with a bore brush and gun cleaner such as Hoppes #9. Wipe the threads clean with a clean cloth and gun cleaner. After ensuring that the threads are clean, place a small amount of synthetic grease on the threads.
#3. Cleaning the silencer core.
Use a clean cloth, bore brush, pick and gun solvent clean the outside and inside of the silencer core. To deep clean the core chambers, you may submerge the core in a gun solvent over night or use a sonic cleaner.
- Please go to the IA-BER FAQ tab to see your Beyond The Warranty information about our maintenance services.