INTERCEPTOR 7.62 QA
FAST ATTACHMENT. SERIOUS CONTROL.
The INTERCEPTOR 7.62 QA delivers substantial sound and recoil reduction in a compact, balanced design engineered for demanding rifle applications. Built for durability and repeatable accuracy, it provides dependable suppression without unnecessary weight or complexity.
At its core is a patented one-piece system machined from solid billet bar stock. With no internal welds, the INTERCEPTOR offers the strength, consistency, and structural integrity required for sustained use.
The quick-attach mounting system allows the silencer to securely mount to its dedicated flash hider in seconds. Its straightforward design makes installation and removal fast, secure, and hassle-free.
The INTERCEPTOR 7.62 is full-auto rated and available with or without our patented Exoskeleton Shroud. Muzzle brakes and additional mounting options for barrels threaded 1/2-28 are also available.
Available finishes include Black, Flat Dark Earth, OD Green, Burnt Bronze, and Brushed Stainless.
Built for speed. Engineered for control.
Specifications
* The Exoskeleton™ Shroud gives many advantages, it also works as a heat sink and gives added grip when mounting the suppressor to the rifle.
The Exoskeleton™ Shroud is required for use with 300WM.
Do not use a crush washer in conjunction with any Innovative Arms silencer.
INTERCEPTOR 7.62
Caliber: 7.62
Weight: 22oz
Length: 7.7”
O.D: 1.5″
Material: Stainless Steel
Finish: Black, OD Green, FDE, Burnt Bronze, or Brushed Stainless
TPI: 5/8 x 24
DB Reduction: 33-36
INTERCEPTOR 7.62 with EXOSKELETON
Caliber: 7.62
Weight: 24oz
Length: 7.7”
O.D: 1.580″
Material: Stainless Steel
Finish: Black, OD Green, FDE, Burnt Bronze, or Brushed Stainless
TPI: 5/8 x 24
DB Reduction: 33-36
Mount Installation
Flash Hider Mount Installation
*Your barrel must be threaded 5/8 x 24.
*Remove existing muzzle device, if any. Remove crush washer. Make sure that the muzzle threads are clean.
*Test the thread engagement by threading on the mount by hand, and verify that the shoulder of the
barrel and mount have a flush contact. Then, remove the mount.
*Apply a high strength thread locker to the threads of the barrel. Rocksett or Red Loctite is recommended.
Thread on the mount and tighten with a 13/16 wrench. The recommended torque is between 20-30 ft-lbf.
DO NOT USE A CRUSH WASHER with any INNOVATIVE ARMS silencer.
Muzzle Brake Mount Installation
*Your barrel must be threaded 5/8 x 24.
*Remove existing shims or crush washer, and muzzle device, if any. Make sure that the muzzle threads are clean.
*Test the thread engagement by threading on the mount by hand, and verify that the shoulder of the barrel and mount have a flush contact. Then, remove the mount.
* Install the provided shims, and re-test the thread engagement, and port alignment by threading on the muzzle brake hand tight, with the muzzle brake mount ports at the 3 and 9 o’clock positions. Verify the shoulder of the barrel and muzzle brake mount have a flush contact. Then, remove the muzzle brake mount, but leave on the shims.
*Apply a high strength thread locker to the threads of the barrel. Rocksett or Red Loctite is recommended. Thread on the muzzle brake mount. Use a 13/16 wrench to tighten the muzzle brake mount on to the barrel and be sure to align the muzzle brake mount ports at the 3 and 9 o’clock positions. Allow the thread locker to dry before mounting the Interceptor.
Customer Reviews
To leave your review below, you must be an actual owner of this product, or a verified Innovative Arms Dealer. For verification purposes, the serial number, and/or product registration are required to be able to submit a review.
Write Your Review Silencer makes my rifle. Video provided by Tah Co Gun Works in Fairfield, TX. I recommend this suppressor if you want a great can with the best quick release mount there is, with a notch warranty and customer service. It performs as well as my other brands (Silencerco Dead Air AAC) but the mount takes it to the next level IMHO. I use this suppressor [Interceptor 7.62] on a belt fed, full auto RPD (7.62x39mm). Not only does this can handle the abuse and filth of this machine gun, but it quiets it immensely. Has a great tone. Both the mounting system (flash hider) and suppressor are engineered and finished perfectly. I cannot speak more highly of Innovative Arms and their suppressors. I certainly have no issue recommending their products, let alone this Interceptor 7.62 suppressor. Use it with confidence. This is my 6th rifle suppressor and I have to say the mounting system is just fantastic. It's what a fast attach suppressor is supposed to be. I don't know why other manufacturers can't seem to figure it out. Thanks for making a great can and I look forward to getting your adjustable upper. I have this with extra mounts for 5.56. It's amazingly quiet in both calibers. The mounting system makes it quick and easy to bounce around on multiple rifles. I really love this suppressor. It works great on 7.62, .300blk and 5.56. The QA could not be any better. It's solid, quiet and well built. Five stars! Top-notch work guys. Thanks for making outstanding products. I couldn't be happier with my interceptor. My buddy has an omega and we did some comparison shooting the other day. We both agreed my interceptor has a better mounting system and is just as quiet as the omega. They are both about the same size but mine weighs more because it's billet steel, which is a non issue for me. At the end of the day I'm very happy but my buddy is pissed off that he paid well over a grand for what he has.Interceptor 7.62Average rating: 14 reviewsJ. AlmondOct 23, 2022
tahcogunworks.comMay 3, 2020MartinOct 5, 2018
Sam G.Sep 29, 2018ACE ArmoryAug 10, 2018
TylerAug 4, 2018EJMar 18, 2018GJ BarnesMar 15, 2018Scott BoydDec 5, 2017CRobinsonAug 19, 2017
Page 1 of 2: « ‹ 12› »